Axial fixing function: The polyurethane fixing ring can be fixed on the side of the rotating part and used as the axial fixing of the rotating part. This fixing method ensures the stability and accuracy of the parts during rotation.
Block function: When the polyurethane fixing ring is fixed at one end of the guide shaft, it can be used as a block of the linear motion mechanism with the guide shaft as the guide rail. This function is particularly important in situations where linear motion stroke or position needs to be limited.
Anti-vibration and noise reduction: Because the side of the polyurethane fixed ring is glued with polyurethane material, it can effectively prevent shock and reduce noise when used as a stop. This feature makes polyurethane fixing rings a significant advantage in situations where high silence or precision control is required.
Locking Collar
Locked by Set Screws
If rust prevention is required, stainless steel material or electroless nickel plating products are preferred
Only applies to B6
Slot Avoidance Type / Double-Hole Type / Four-Hole Type
Double Threaded Hole Type / Four Threaded Hole Type
Double Counterbore Locking Type / Triple Counterbore Locking Type
Double-Hole Locking Type / Double Threaded Hole Locking Type
Only applicable to dimensions with * mark
Three-Hole Locking Type / Three Threaded Hole Locking Type
If rust prevention is required, priority should be given to electroless nickel plating products. Flat Key Shaft
Detachable Type
Single-Hole Locking Type / Double Threaded Hole Locking Type
Balanced Type / Side Mounted Type
Single-Side Cutting Type
The effective threaded depth for specification M1 is 7 (with through-hole for the bottom hole), and the rest are fully threaded.
S45C Material for Specification Specification with Opening Machining
Bearing Locking Collar Standard Type · Long/Short Pressure Ring Type Compact Type · Long/Short Pressure Ring Type
Long Pressure Ring Type Applicable Bearing (Outer Diameter)
Internal Thread Type Coarse Thread Fine Thread Coarse Threaded
Inner Specification Not Applicable to Coarse Thread Coarse Thread’s W Dimension for Specification 5 is 1.5 Specification 24 Not Applicable to Fine Thread
Cutting Type Standard Handle Small Handle Zinc Alloy Zinc Die Casting
Epoxy Resin Coating Baking Finish Steel Chromate Finish Full Thread
Handle Color Orange Black Silver
Tolerance of Specification’s H Dimension is ±0.3. Chamfer of Inner and Outer Perimeter for Specification C1.0
Polyurethane Locking Collar Cushion Pad Polyurethane (Shore A70) Heat Resistance: 70℃
Features: Equipped with polyurethane locking collar, it can reduce the metallic noise generated during collisions between metals.