1. High connection reliability:
Hinge pins are precisely designed and manufactured to provide stable connections that ensure the relative position and movement of mechanical components.
Under heavy load or vibration, the hinge pins keep the connection stable and prevent mechanical failure due to loosening or falling off.
2. Good flexibility:
The hinge pin allows the connected parts to rotate relative to each other within a certain range, and this flexibility allows the mechanical system to adapt to different working conditions and requirements.
When the position or Angle of the mechanical component needs to be adjusted, the flexibility of the hinge pin simplifies the operation process and increases work efficiency.
1.Internal Thread Type, External Thread Type
Change N-part external thread to fine thread, Change to a four-sided wrench slot, Only applicable to stepped type
In this table, the N dimension in parentheses refers to the fine thread. When selecting, please change N to NC. Above
Add a guide section, Add the guide section at the position indicated in the left figure
Internal thread mounting type. When selecting Y and F, ensure that the t dimension in the figure is not less than the value shown in the previous table. If the bottom holes interfere with each other, they should be through holes.
2.Guided External Thread Mounting Type
One end with internal thread and one end with external thread type, Add guiding flat, Flange type
Nut fixing type, Tension pulley type, Split pin fixing type, Retaining ring fixing type
Hard chromium plating, coating thickness, Split pin, The tolerance refers to the L dimension, and others are general tolerances.
3.L Dimension Selection Type, L Dimension Specified Type, Accessory Split Pin Specification, Change split pin hole position (Note: L Dimension Selection Type is not applicable)
Change retaining ring groove position, Accessory retaining ring, Change internal thread diameter (Only applicable to the D specifications in the previous table)
Key fixing type, Lock screw fixing type, Double locking surface type (Only applicable to the lock screw fixing type)
4.Hinge Pin with Shoulder, Change Shoulder Thickness, Add Shoulder Stop Surface, Change Split Pin Position
With Hexagonal Hole Type, Ultra-thin Head Type, Zinc-plated U-shaped Nut, Stainless Steel U-shaped Nut, Change Thread Diameter
Change Thread Length, Hexagonal Hole Type Not Applicable, Shaft Diameter Tolerance Selection Type
T tolerance is the recommended tolerance when used with sleeveless bushings, Diameter d is a reference dimension, Only applicable to nut fixing type
Rolling Axle Pin, Retaining Ring Fixed Internal Thread Type
Step Screw for Fulcrum, Slotted Type, Head Cutting Type, Hexagonal Head Type, Add Relief Type
Free Specification Type, Fulcrum Pin, Short-head Hexagonal Hole Type
Step Bolt, Ultra-short Head Type, Short Head Type, Round Head Screw Type, Cross Slot Type
English
Russian
Spanish
Italian
Arabic
Korean
German
Japanese
Vietnamese
Turkish
Introduction
Specification Table
Download
